introduction
This machine is made of cutter, cutter tooth, turn, rack and so on. There is some cutter tooth on
the cutter. The cutter tooth can be removed. There is a rod before the cutter. You should put the
coconut eye on the top of the rod the put the coconut incline to the cutter to remove the shell.
parameter
Model |
Capacity (pcs/h) |
Shelling plate | Voltage | Power |
CDM | 600 | 2 group | 380V/3PH | 1.5kw |
workign process
When the machine is working , the transmission reduce gear drive the main axle to move , which make the mill
run by the power transmission chain wheel . Due to the cutter in the mill , putting the coconut the position
between the mill and thrust bar with the manual turn continuously , which can remove the shell of the coconut
under the function of the cutter and thrust bar running together .